Resources / Agriculture
Humidity Control for Growing and Post-Harvest Environments
Application notes and selection guidance for greenhouses, indoor cultivation rooms, drying spaces, and storage environments where humidity affects the crop rather than the building.
Use these articles to describe the growing conditions, moisture load, and airflow situation before comparing equipment.
Humidity in a growing space is a crop condition, not just a comfort setting. Cultivation-measurement scene. Read about crop environments, transpiration and condensation.
RESOURCE CATEGORIES
Move between resource groups and the related industry, product, or engineering page
01
Agriculture — YAKE
Equipment families, project support, and application scope for cultivation, greenhouse, and controlled-environment facilities.
Open related page → 02Industrial Dehumidification (42)
Comparisons and engineering notes covering refrigerant, ceiling-mounted, desiccant, and low-dew-point equipment, and the operating conditions that decide between them.
Browse this category → 03Energy Storage & Electrical Environments (34)
Guidance on dew point, condensation risk, compact installation, controls, and validation for battery energy storage, cabinets, containers, and switchgear.
Browse this category → 04Commercial & Building Moisture Control (15)
Practical guidance on condensation, water damage, drying, mold prevention, and equipment choices for commercial spaces and building moisture problems.
Browse this category → 05Humidification & Air Quality (4)
Technical articles on humidification, ventilation, filtration, humidity measurement, and how moisture control interacts with wider air systems.
Browse this category → 06Humidity Science & Engineering (14)
Explanations of relative humidity, dew point, condensation, moisture measurement, monitoring, and controls for industrial humidity-control decisions.
Browse this category → 07All Articles (193)
Every article in the library, newest first.
Browse this category →TECHNICAL ARTICLE LIBRARY
Search, filter, and continue from the topic relevant to your work
Each article has a clear place in the resource library and connects to relevant industries, product families, cases, and project support.
FIND THE RIGHT RESOURCE
Search article titles, summaries, categories, and technical topics.
Search across the resource library.
Strawberry Greenhouse Temperature Management: Build a Crop-Specific Control Plan
Manage strawberry greenhouse temperature by cultivar, stage, canopy and root-zone measurements rather than a universal setpoint.
How Humidity Affects Plant Growth: Reading Air and Leaf VPD
Understand the difference between air and leaf VPD, work through a temperature example, and connect climate records with crop observations.
Winter Greenhouse Humidity: Heating, Ventilation, Dew Point and Condensation
Heating a winter greenhouse can reduce relative humidity, but it does not remove water from the air. Condensation risk is controlled only when the project manages both sides of the condition: the air’s dew point and the temperature of glazing, screens, structure, pipes and leaves. Water leaves th…
Greenhouse Dehumidifier Electricity: Meter Boundaries, kWh and Heating Cost
Estimate greenhouse dehumidifier electricity from measured power and operating hours, then account for heating fuel separately. The worked numbers are assumptions, not product ratings.
Smart Greenhouse Climate Control: Responsibilities, Interfaces and Commissioning
A smart greenhouse climate-control system is not one controller or one piece of equipment. It is a chain of responsibilities: the grower or agronomist defines crop and production objectives; the supervisory climate computer coordinates heating, ventilation, screens, lighting, irrigation, CO₂ and…
Greenhouse Blackout Curtains: Select and Operate for the Crop’s Light Schedule
Select a greenhouse blackout curtain from crop dark-period and light-leak requirements, then verify controls, airflow and humidity under the actual schedule.
Greenhouse Air-Distribution Tubes: Getting Air to the Canopy, Not Just Into the House
A polyethylene distribution tube that discharges most of its air in the first ten metres is not a ventilation system. It is an expensive draught at one end of the house and a stagnant zone at the other — and it is the single most common way growers end up with uniform equipment and non-uniform cr…
Grow Tent Temperature and Humidity for Commercial Trial Rooms
For commercial propagation and trial rooms, measure crop moisture, tent-to-room air exchange and lights-off conditions before choosing room-level drying.
Vertical Farming Companies: Roles and How to Compare Partners
Vertical farming companies do not all provide the same service. Some operate farms. Others supply cultivation systems, racks, lighting, irrigation, controls, climate equipment, software, or project integration. Before comparing vendors, define the role you need and the decisions that role must ow…
Strawberry Greenhouse Humidity: Reading Disease Evidence
Use crop location, tissue, wetness observations, and the observation window to frame a strawberry greenhouse disease question before discussing humidity or equipment.
Mushroom Grow Room Humidity Control: Stage Inputs, Airflow and Condensation
Mushroom grow-room humidity control should be specified by species, production stage and the facility’s approved growing procedure—not by one universal RH number. The practical control problem includes air temperature, moisture generation, CO₂ removal, air velocity, surface temperature, sanitatio…
Desiccant Dehumidification for Tomato Greenhouses: Fit and Limits
Assess desiccant dehumidification for tomato greenhouses through moisture removal, regeneration heat, crop records and whole-system operating costs.
NO MATCHING RESOURCES
Try a broader term or describe the application differently.
Search by equipment type, humidity issue, industry, installation condition, or a technical topic.
APPLY THE INFORMATION
Need help applying an article to a real project?
Share the application, operating conditions, target, and installation limits. We can help identify the questions that matter before product selection or engineering review.
Discuss Your Requirement